Name: LC1D09FDC - Công tắc tơ LC1D 3P 9A coil 110VDC
Brand: SCHNEIDER
SKU: LC1D09FDC
Availability: InStock
Rating: 5 (1 reviews)

LC1D09FDC - Công tắc tơ LC1D 3P 9A coil 110VDC

Mã sản phẩm: LC1D09FDC

Thương hiệu: SCHNEIDER

Sẵn có: 1

Trần Hiệp

0968095220

Đình Khuyến

0968095221

Mô tả

Schneider TeSys Deca series contactor LC1D09FDC, 3P 9A, AC-3 4kW 400V, 1NO+1NC aux contact, 110V DC coil, screw connection, certification (IEC, CCC, CCS, RoHS, REACH).

Specification

Key Information
Product range	TeSys Deca
Product range	TeSys Deca
Product Type	Contactor
Product Short Name	LC1D09FDC
Contactor application areas	Applicable to non-inductive or slightly inductive loads, resistance furnaces are used for AC loads with a power factor greater than or equal to 0.95
Use Category	AC-4 AC-1 AC-3 AC-3e
Number of poles	3P
Rated operating voltage [Ue]	Power circuit: <= 690 V AC 25...400 Hz Power circuit: <= 225 V DC
Rated operating current [Ie]	25 A (when operating temperature <= 60 °C) when operating voltage <=<= 440 V AC AC-1 for power circuit 9 A (when operating temperature <= 60 °C) when operating voltage <=<= 440 V AC AC-3 for power circuit 9 A (when operating temperature <= 60 °C) when operating voltage <=<= 440 V AC AC-3e for power circuit
Control circuit voltage [Uc]	110 V DC

Additional information
Motor power (kW)	5.5 kW When operating voltage <=500 V AC 50/60 Hz (AC-3) 2.2 kW When operating voltage <=220/240 V AC 50/60 Hz (AC-3) 4 kW When operating voltage <=380/400 V AC 50/60 Hz (AC-3) 4 kW When operating voltage <=415/440 V AC 50/60 Hz (AC-3) 5.5 kW When operating voltage <=660/690 V AC 50/60 Hz (AC-3) 2.2 kW When operating voltage <=400 V AC 50/60 Hz (AC-4) 5.5 kW When operating voltage <=500 V AC 50/60 Hz (AC-3e) 2.2 kW When operating voltage <=220/240 V AC 50/60 Hz (AC-3e) 4 kW When operating voltage <=380/400 V AC 50/60 Hz (AC-3e) 4 kW When operating voltage <=415/440 V AC 50/60 Hz (AC-3e) 5.5 kW When operating voltage <=660/690 V AC 50/60 Hz (AC-3e)
model	LC1D
Loop contact type	3 NO
Protective cover	bring
Conventional thermal current [Ith]	25 A (when operating temperature <= 60 °C) for power circuit 10 A (when operating temperature <= 60 °C) for signal circuit
Rated short-time withstand current [Icw]	105 A When the operating temperature is <=40 °C, it can last for 10 s for the power circuit 210 A When the operating temperature is <=40 °C, it can last for 1 s for the power circuit 30 A When the operating temperature is <=40 °C, it can last for 10 minutes for the power circuit 61 A When the operating temperature is <=40 °C, it can last for 1 minute for the power circuit 100 A When the operating temperature is <=40 °C, it can last for 1 s for the signal circuit 120 A When the operating temperature is <=40 °C, it can last for 500 ms for the signal circuit 140 A When the operating temperature is <=40 °C, it can last for 100 ms for the signal circuit
Fuses used with relays	10 A gG, for signal circuits in accordance with IEC 60947-5-1 25 A gG when operating voltage <=<= 690 V coordination type 1, for power circuits 20 A gG when operating voltage <=<= 690 V coordination type 2, for power circuits
Average impedance	2.5 mΩ - Ith 25 A 50 Hz for power supply circuit
Rated insulation voltage [Ui]	Power circuit: 690 V in accordance with IEC 60947-4-1 Signal circuit: 690 V in accordance with IEC 60947-1
Overvoltage category	III
Pollution degree	3
Rated impulse withstand voltage [Uimp]	6 kV compliant with IEC 60947
Safety and reliability level	B10d = 1369863 times nominal load contactor in accordance with EN/ISO 13849-1 B10d = 20000000 times mechanical load contactor in accordance with EN/ISO 13849-1
Mechanical life	30 Mcycles
Electrical life	0.6 Mcycles 25 A at AC-1 Ue <= 440 V 2 Mcycles 9 A at AC-3 Ue <= 440 V 2 Mcycles 6.6 A at AC-3 Ue 660/690 V 2 Mcycles 9 A at AC-3e Ue <= 440 V 2 Mcycles 6.6 A at AC-3e Ue 660/690 V
Control loop characteristics	DC Standard
Surge Suppression Module	Built-in bidirectional peak current limiting diode
Control voltage limit	0.1...0.25 Uc (-40…60 °C): coil released 0.7...1.25 Uc (-40…60 °C): coil actuated
Surge power(W)	5.4 W (20 °C)
Holding power consumption (W)	5.4 W at 20 °C
Rated operating power(W)	5.4 W
Action time	63 ±15 % ms closing 20 ±20 % ms breaking
Time constant	28 ms
Maximum operating frequency	3600 times/hour at 60 °C
Wiring Capacity	Power circuit: screw terminals1 1…4 mm² Lug Ø: 8 mm Cable type: Flexible cable without terminal Power circuit: screw terminals2 1…4 mm² Lug Ø: 8 mm Cable type: Flexible cable without terminal Power circuit: screw terminals1 1…4 mm² Lug Ø: 8 mm Cable type: Flexible cable with terminal Power circuit: screw terminals2 1…2.5 mm² Lug Ø: 8 mm Cable type: Flexible cable with terminal Power circuit: screw terminals1 1…4 mm² Lug Ø: 8 mm Cable type: Solid cable without terminal Power circuit: screw terminals2 1…4 mm² Lug Ø: 8 mm Cable type: Solid cable without terminal Control circuit: screw terminals1 1…4 mm² Cable type: Flexible cable without terminal Control circuit: screw terminals2 1…4 mm² cable type: flexible cable without terminal Control circuit: screw terminals 1 1…4 mm² cable type: flexible cable with terminal Control circuit: screw terminals 2 1…2.5 mm² cable type: flexible cable with terminal Control circuit: screw terminals 1 1…4 mm² cable type: solid cable without terminal Control circuit: screw terminals 2 1…4 mm² cable type: solid cable without terminal Power circuit: screw terminals
Tightening torque	Power circuit: 1.7 Nm by screwing with screwdriver Ø 6 flat headPower circuit: 1.7 Nm by screwing with screwdriver No 2 Phillips screwControl circuit: 1.7 Nm by screwing with screwdriver Ø 6 flat headControl circuit: 1.7 Nm by screwing with screwdriver No 2 Phillips screwPower circuit: 1.7 Nm by cable connector with screwdriver Ø 6 flat head screw: M3.5Power circuit: 1.7 Nm by cable connector with screwdriver No 2 Phillips screw: M3.5Control circuit: 1.7 Nm by screwing with screwdriver pozidriv No 2Power circuit: 1.7 Nm by screwing with screwdriver pozidriv No 2
Auxiliary contact type	Type Mechanical connection 1 NO + 1 NC Conforming to IEC 60947-5-1 Type Mirror image of main contact state 1 NC Conforming to IEC 60947-4-1
Auxiliary contacts available on each contactor	1 NO + 1 NC
Signal loop frequency	25...400 Hz
Minimum switching current [Imin]	5 mA for signal loop
Minimum switching voltage	17 V for signal loop
Insulation resistance	> 10 MΩ for signal loop
No overlap time	1.5 ms between NC and NO contacts when de-energized 1.5 ms between NC and NO contacts when energized
Installation	Base plate mounting rail mounting

Thẻ bài viết:

LC1D09FDC - Công tắc tơ LC1D 3P 9A coil 110VDC

Specification

Gửi nhận xét của bạn

Sản phẩm cùng loại

Sản phẩm đã xem